Vehicles
Sections
26 not categorized PORSCHE 914 REINFORCEDCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: BOXSTER 1997-04 (includes uncategorized and accessory items) FVD10504301 These rocker arms allow the valve clearance to be finely adjusted by a set screw. They are manufactured to racing specifications (high rpm load), meaning that they are forged, cnc machined and dlc coated for the ultimate in reliability, which also makes them perfect for street use. - valve clearance is adjustable, which saves time at races and on maintenance. - longer contact surface to work with OEM or high performance camshafts. - work seamlessly under high rpm loads. - forged. - saves weight. - dlc (diamond like carbon) coated which reduces friction and is extremely durable. They will be an indispensable tuning component for your classic!
$4,864.29
Make a selection FVD12399600R Silicone boost hose kit FVD's direct replacement boost hose kit eliminates common boost hose "blow outs" on modified turbo's. Facts: tested to withstand over 75 psi (5 bar) boost pressure.fuel and oil resistanttemperature range between - 50 to + 180 degreesbolt on kit over time the OEM boost hoses tend to expand and contract under higher load, which leads to leaks, or "blow outs". Also, the OEM aluminum end does not secure properly into the intercooler, which causes boost leaks, and boost hose blowouts. Our machined billet ends are a perfect secure fit and our silicone hose is designed not to expand under boost pressure. The hose kit is a complete bolt on kit.
$590.70
Make a selection FVD512991GT3RS Made in Germany by a premier manufacturer of motorsport body work. Extremely high-quality, aero-tested, paintable grp (glass reinforced plastic) deck lid with functional GT3 wing. The decklid has functional, yet subtle ram air spoiler incorporated into the design like the GT3. The ram air spoiler increases the velocity of the air into the intake for added performance. This decklid is also available with a polished carbon wing, part # FVD 512 991 GT3 rsc features: produced by a premier German motorsports manufacturer. Motorsport quality standards. Lightweight. Decklid made of high strength, lightweight grp (glass reinforced plastic). Mounts like factory. Includes: grp deck lid grp wing grp end plates aluminum up...(choose a part on the right to read more)
$5,362.50
Make a selection 10050305503GFK Made in europe by one of the manufacturers to Porsche. Extremely high-quality grp (glass-reinforced plastic) rear bumper that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 9.7 lbs. (4.4 kg) - made of high strength, grp (glass-reinforced plastic) sold individually. 1 necessary per car. Please note: this only fits in conjunction with widebody / rsr rear fenders, part # FVD503930001 . Please provide us with the year / model. These are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must proper...(choose a part on the right to read more)
$1,265.00
Make a selection 071280630 Seat shell consisting of glass fiber reinforced plastic gfk, weight approx. 22 lbs (10,0 kg), shock absorbing foam, special belt slot for hans-systems, belt slot for 4-, 5- or 6- point-belt, head protector, friction grip surface in shoulder and seating area, hans protection, inflammable resisisting cover materials General FitmentALL
From $1,694.94
Make a selection 20505HD0FR The clutch masters fx250 system uses the power plus i pressure plate and a steel backed kevlar disc. Rigid disks are designed to be used with aftermarket lightweight flywheels only. This clutch is designed for the street enthusiast or weekend racer. The fx250 offers similar torque holding capacity to the fx100, however, its life expectancy is increased 2-3 times with the kevlar disc. General FitmentBOXSTER 1997-04
$1,502.96
Make a selection 20505HDB4R The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable ceramic disc. Rigid disks are designed to be used with aftermarket lightweight flywheels (lwfw) only. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is very aggressive and not recommended for a street setup. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 or 6 wing (paddle) configuration, with the 4-wing being the more aggressive setup. General FitmentBOXSTER 1997-04
$1,586.45
Make a selection 798928363 Ksport version rr damper system is built specifically for road racing only. Aggressive rates and valving are chosen for maximum handling and performance with acute reaction and responsiveness. Integrated with 36 levels of dampening adjustment, simultaneous compression and rebound adjustment, lightweight aluminum mounts, and pillow ball upper mounts on some applications. (race use only.) General FitmentBOXSTER 1997-04
$2,894.05
Make a selection 20505HDC4D The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is very aggressive and not recommended for a street setup. General FitmentBOXSTER 1997-04
$1,586.45
Make a selection 20505HDB6R The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable ceramic disc. Rigid disks are designed to be used with aftermarket lightweight flywheels (lwfw) only. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup. General FitmentBOXSTER 1997-04
$1,502.96
Make a selection 20707HDB4R The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable ceramic disc. Rigid disks are designed to be used with aftermarket lightweight flywheels (lwfw) only. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is very aggressive and not recommended for a street setup. General FitmentBOXSTER 1997-04
$1,586.45
Make a selection 20505HRFFD The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2. General FitmentBOXSTER 1997-04
$1,502.96
Make a selection 20505HDFFR The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Rigid disks can be used with aftermarket lightweight flywheels only. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2. General FitmentBOXSTER 1997-04
$1,502.96
Make a selection 20707HD0FR The clutch masters fx250 system uses the power plus i pressure plate and a steel backed kevlar disc. Rigid disks are designed to be used with aftermarket lightweight flywheels only. This clutch is designed for the street enthusiast or weekend racer. The fx250 offers similar torque holding capacity to the fx100, however, its life expectancy is increased 2-3 times with the kevlar disc. General FitmentBOXSTER 1997-04
$1,502.96
Make a selection 20707HD0FD The clutch masters fx250 system uses the power plus i pressure plate and a steel backed kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the street enthusiast or weekend racer. The fx250 offers similar torque holding capacity to the fx100, however, its life expectancy is increased 2-3 times with the kevlar disc. General FitmentBOXSTER 1997-04
$1,502.96
Make a selection HF9451 Hofele-design is an innovative company in the product range of car accessories with international markets, and supply these accessories to important car producers and trade companies worldwide. They specialize in a few specific automotive brands such as audi, Porsche and volkswagen. Specially for these brands, the "hofele-design-edition" was created. General Fitment911 1998-05BOXSTER 1997-04
$1,993.95
Make a selection 20505HDC6D The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup. General FitmentBOXSTER 1997-04
$1,502.96
Make a selection 20505HD0FD The clutch masters fx250 system uses the power plus i pressure plate and a steel backed kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the street enthusiast or weekend racer. The fx250 offers similar torque holding capacity to the fx100, however, its life expectancy is increased 2-3 times with the kevlar disc. General FitmentBOXSTER 1997-04
$1,502.96
Make a selection 20707HDB6R The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable ceramic disc. Rigid disks are designed to be used with aftermarket lightweight flywheels (lwfw) only. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup. General FitmentBOXSTER 1997-04
$1,502.96
Make a selection 20707HDFFD The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2. General FitmentBOXSTER 1997-04
$1,502.96
Make a selection 20707HDC6D The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup. General FitmentBOXSTER 1997-04
$1,502.96
Make a selection FVD505981SCH Motorsport quality grp (glass-reinforced plastic) front bumper, specifically produced for the early 911 style headlights up to 2001. This will fit all 986 Boxster models however. - produced by a German motorsport manufacturer. - provisions for turn signals are included. - lightweight - made of high strength, grp (glass-reinforced plastic) - includes a sheet of black race mesh for the radiator inlets. Please note: this is a motorsport part that takes time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must properly be fitted and completely prepared prior to paint. They require pre-fitment, filling, sanding, primer and paint...(choose a part on the right to read more)
$1,381.37
Make a selection 330930103R02 If you are looking to replace a damaged strosek kit or update your car with a strosek kit, we have it. This is made with lightweight gfk / grp (glass fiber komposite / glass reinforced plastic). Sold as a set. 1 needed per car. Please note: this does not include door sills. Ohne turleisten
$726.00
Make a selection FVD11GK181GF Motorsport quality grp (glass-reinforced plastic) front bumper bar. Features: - produced by an German motorsport manufacturer. - lightweight 5.7 lbs. (2.6 kg) - made of high strength, grp (glass-reinforced plastic) sold individually. 1 necessary per car. Please note: please provide us with the year / model. These are motorsport quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must properly be fitted and completely prepared prior to paint.
$559.90
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |